|
|
|
[Magnetic Flowmeter] ADMAG AXF Series Magnetic Flowmeters |
|
The AXF magnetic flowmeter is sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of fieldproven experience.
The AXF magnetic flowmeter is significantly easier to maintain thanks to the combination of replaceable electrodes and a diagnostic function that detects the adhesion level on the electrodes. The AXF also employs a dual frequency excitation method (available for sizes up to 400 mm / 16 in.) that eliminates fluid noise. A newly enhanced dual frequency excitation method is also available as an option for more difficult applications to ensure greater stability and quicker response. |
|
|
|
 |
|
Features:ADMAG
AXF Magnetic Flowmeters
| User-oriented Functionality |
| |
Fluid Adhesion Level Diagnosis |
| |
The amount of insulating
material on the electrode is constantly monitored to determine when maintenance
should be performed. An optional replaceable electrode is easy to remove and
clean. |
| Flexible Electrical Connection
Direction |
| |
The converter or the
terminal box can be rotated in either direction to match the position of the
electrical connections at the installation site. |
| Clear and Versatile Indications |
| |
The large, backlit full
dot matrix LCD can display a variety of messages up to three lines in length.
When an alarm condition occurs, a full description of the appropriate
countermeasure is displayed. |
| Easy Setup |
| |
The most frequently used
parameters are arranged in a group at the top of the display. Infrared switches
enable the setting of parameters without opening the cover. |
| Operation Immediately after
Installation |
| |
The AXF is shipped with
the main parameters completely set and can go into operation as soon as
installation and wiring are completed. |
| |
| Expansion of Product Lineup |
| |
Improved Accuracy Specification |
| |
The standard accuracy is
0.35% of reading. Also available as an option is high accuracy calibration rated
at 0.2% of reading. |
| Extra Small Size Flange Type |
| |
Flange types are now
available in sizes as small as 2.5 mm. |
| Variety of Sanitary Connections |
| |
A wider variety of
sanitary connections are now available, including Tri-Clamp, ISO, DIN and
SMS. |
| |
| Enhanced Performance |
| |
Enhanced Dual Frequency
Excitation |
| |
The enhanced dual
frequency excitation method is available as an option. This provides highly
stable measurements involving high concentration slurries or low conductivity
fluids. |
| Lower Minimum Conductivity. |
| |
The newly designed AXF
converter permits the measurement of fluids with conductivity as low as 1μS/cm
depending on the nominal pipe size and fluid condition. |
| High-Speed Pulse Output: |
| |
The maximum rate for
high speed applications such as short-duration batch processes is now 10,000 pps
(pulses per second). |
|
Specifications: ADMAG AXF Magnetic Flowmeters
| |
AXF Remote
Flowtube |
AXF Integral
Flowmeter |
AXFA14 Converter |
AXFA11
Converter |
| Nominal Pipe Size |
2.5 to 2600 mm
(0.1 to
104 in.)
[depends on model type and process connection
type] |
2.5 to 400 mm
(0.1 to
16 in.)
[depends on model type and process connection
type] |
For Flowtube
size ; 2.5 to 400mm
(0.1 to 16
in.) |
For Flowtube
size ; 2.5 to 2600mm
(0.1 to 104
in.) |
| Type of use |
General-purpose use,
Ex-proof type,
Sanitary type,
Submersible type |
General-purpose use,
Ex-proof type,
Sanitary type |
General-purpose use,
Ex-proof type |
General-purpose use |
| Fluid Temp. |
-40～160 deg.C (-40 to 320
deg.F)
(-10 to 160 deg.C (14 to 320 deg.F) for Sanitary
type) |
- 40～130 deg.C (-40 to 266
deg.F)
(-10 to 130 deg.C (14 to 266 deg.F) for Sanitary
type) |
- |
- |
| Ambient Temp. |
-40 to 60 deg.C (-40 to 140
deg.F) [ depends on model type ] |
| Accuracy |
0.35% of rate (Optional ; 0.2%
of rate) |
| Fluid Conductivity |
1 micro-S/cm or larger
(depends on nominal pipe size and fluid condition) |
| Lining |
Fluorocarbon
PFA/Ceramics/Polyurethance Rubber/
EPDM Rubber/ Natural Soft
Rubber
[depends on model type] |
- |
- |
| Process Connection |
Wafer, Flange, Sanitary
connections
(Clamp[Tri-clamp, DIN, ISO], Union thread[DIN,
ISO SMS], Butt-weld), etc. |
- |
- |
| Maximum Cable
Length |
- |
- |
100m
(330
ft) |
200m
(660
ft) |
| Indicator |
- |
Multi line backlit LCD (Full
dot-matrix) |
| Diagnosis |
Adhesion diagnosis, Empty
pipe, Coil open, etc. |
| Alarm message |
Alarm message with corrective
measures is indicated (English, German, French, Italian, Spanish,
Japanese) |
| Excitation method |
Dual frequency excitation:
size 2.5 to 400mm,
Pulsed DC excitation: size 500 to 2600
mm,
Enhanced dual frequency excitation (optional): size 25
to 200 mm |
| Ex-proof type |
ATEX, FM, CSA, IECEx,
TIIS |
- |
| Options |
Replaceable electrode, Rotatable terminal
box(converter), Mirror finished lining surface(for PFA/Ceramics), Special
gaskets, etc. |
* Refer to GS sheet for details.
|
|
|
|
